SX-3 Chassis short wheel base
2009 with again
extended equipment
The wheel base of the H.A.R.M. SX-3 short chassis is 465 mm. Therefore this chassis is suitable for bodies as for e.g. Porsche GT2, Porsche GT3 and other classic bodies as Fiat 500. The decision to offer a current chassis with this wheel base has been made due to a personal hobby. In Germany there is offered a race series especially for such model, Jörn Schmitt with his H.A.R.M. SX-3/07 short expert is one of the drivers and H.A.R.M. one of the main sponsors.
The chassis construction is mainly based on the version 05/07. The car is delivered with the new hydraulic brakes as the master cylinders fit the upper chassis perfectly.
The equipment
The short chassis just build on demand and the equipment can be determined by the customers.
If you are interested please inform us.
Delivery condition
The SX-3 chassis are strictly delivered completely pre-mounted. All screws are fixed with Loctite. The chassis delivered are all measured and adjusted with a basic setup. This enables the driver to get first impression and to gain experience with the new chassis right away without having problems through building or setup mistakes. First of all, of course the radio has to be build in and ride height needs to be checked. The ride height can be changed easily through adjustment of the damper springs.
Measurements
| Technical data | |
|---|---|
| Wheelbase: | 465 mm |
| Length: | 750 mm |
| Width: | 395 mm |
| Weight: | ca. 10 kg |
| Engine: | Zenoah G230 RC |
| Cyl. capacity: | 23 ccm |
